System Overview

An innovative insulation product, MasterFloor is an under-floor insulation panel designed for lightweight raised flooring systems. Made from dense fire retardant polystyrene, the unique concertina design allows the panel to sit firmly between the joist under the floor and transform it thermal performance. Available in two thicknesses and bagged for convenience, the rigid panels are easily installed by builders or the d-i-y enthusiast. With up to 15% of your homes energy losses attributed to the floor, MasterFloors thermal values of R1.3 and R2.0 will give instant energy savings both in winter and summer.

For more information including a summary of performance and product details, refer to the brochure.

Download Brochure

Download Installation Instructions

THERMAL RATING COMPARISON TABLE

Ensure your sub-floor is not the weakest link in your energy efficiency strategy.

19mm PARTICLEBOARD FLOORING / CARPET ON RUBBER UNDERLAY

DIRECT CONTACT SYSTEM	Cavity System (15mm air gap between flooring and MasterFloor)
50mm MasterFloor insulation R 2.053	50mm MasterFloor insulation R 2.206
75mm MasterFloor insulation R 2.702	75mm MasterFloor insulation R 2.855
90mm MasterFloor insulation R 3.0917	90mm MasterFloor insulation R 3.2447

19mm PARTICLEBOARD FLOORING / 19mm HARDWOOD FLOORING

DIRECT CONTACT SYSTEM	Cavity System (15mm air gap between flooring and MasterFloor)
50mm MasterFloor insulation R 1.896	50mm MasterFloor insulation R 2.049
75mm MasterFloor insulation R 2.545	75mm MasterFloor insulation R 2.698
90mm MasterFloor insulation R 2.9347	90mm MasterFloor insulation R 3.0877

House Cladding in Perth, Melbourne, Sydney, Brisbane, Adelaide

MasterWall is an extremely lightweight, exterior fibreglass reinforced polystyrene cladding system that has been specifically manufactured to meet and withstand harsh Australian conditions. Our system has been designed using tried and tested technology extensively used for more than 60 years throughout widespread Europe and North America. The MasterWall house cladding system comes fully inclusive of industry an approved acrylic render systems, frame wraps, trims and sealants and is ideal for all existing, new and renovated second storey additions MasterWall is an insulative house cladding system that is suitable for external use on both timber and steel framed dwellings as well as being perfectly suited for solid concrete and masonry walls. The MasterWall system offers a weather resistant and rendered-like finish that is available in a range of both textures and colours.

The MasterWall Testing & Rating Process

The MasterWall cladding system has been thoroughly tested and adhered to all checks, receiving CodeMark Accreditation, Bushfire Attack Level 29 and a Cyclonic C4 Rating.

MasterWall CodeMark Certification

MasterWall products have undergone rigorous testing to demonstrate its suitability and compliances for both volumes one and two of the Australian National Construction Code.

MasterWall Bushfire Attack Level Rating Adelaide

When tested against the AS1530.8.1-2007 including the radiant bushfire stimulation test, as well as burning ember attack, our MasterWall cladding system achieved BAL29 rating, therefore achieving Bushfire Attack Level compliance.

Cyclonic Rating Testing for Brisbane

The MasterWall cladding system, when tested, achieved a C4 certification, which demonstrates its to perform and withstand under extreme weather conditions often experienced throughout Australia. For additional product information, performance and specifications, please download our PDF brochure by clicking the link below.

MasterWall House Cladding

Panelling

MasterWall is a ready-to-render external polystyrene house cladding system that is lightweight, reinforced, and mechanically adhered to the outer face of a building. This particular product is an extremely popular choice for second storey additions. The base material is made from (M) Grade, expanded polystyrene (EPS) in panel form with an applied facing of a cementitious-based material. This facing is also reinforced with a fiberglass mesh.

Facing

The facing of our MasterWall house cladding system is manufactured using a flexible cementitious-based material to ensure an excellent mechanical fix and natural bond. The finished surface of the facing has a light, trowel-type appearance.

Reinforcement

The facing of the MasterWall system is reinforced with an alkaline-resistant, fibreglass mesh and is compatible with approved acrylic render and decorative finishes.

Thermal Insulation in Melbourne

MasterWall’s thermal insulation panels contribute to the overall energy efficiency of Australian homes to help to decrease your cooling expenses during summer and heating expenses during winter.

About MasterWall Cladding Systems Perth

MasterWall locally warehouses their insulated wall cladding panels and supplies throughout Adelaide CBD and regional areas. We also stock a wide range of tools and accessories to aid the installation process of polystyrene panels and rendering products to achieve the perfect finish. MasterWall is proud to boast a strong reputation of excellence within the residential construction sector, and have worked in partnership with many Australian Builders for second storey additions in Sydney, Perth, Brisbane, Adelaide and Melbourne. For more information or to obtain a copy of MasterWall’s performance, compliance and product specifications, please refer to our online product brochure.

The MasterWall Guarantee in Sydney

MasterWall guarantees that their product materials and workmanship is free from defects for 7 years from the date of manufacture. Their extensive testing process ensures that their products have been tried and tested to adhere to Australian Standards. When you buy from MasterWall you can have peace of mind knowing that you have made the right choice. For the highest quality wall and underfloor insulation systems in Sydney, Perth, Brisbane, Adelaide or Melbourne, call MasterWall today on 02 9674 7402 or simply fill in the contact us form on the website.

Polystyrene Cladding - The Best Structural Insulated Roof Panels in Australia

MasterWall is an external, lightweight, fibreglass reinforced polystyrene cladding system that has been specifically designed to meet Australian standards. This system is based on proven technology that has been used extensively for more than 60 years throughout Europe and North America. Our polystyrene cladding system includes the application of industry approved acrylic render systems, frame wraps, trims and sealants as well as flashings that fit together to create a lightweight, weather tight building envelope. MasterWall is an insulative polystyrene cladding system that is suitable for external use on timber or steel framed buildings as well as solid concrete and masonry walls boards. The system provides a weather resistant, rendered wall board finish in a wide range of textures and colours.

The MasterWall Standard

Our MasterWall system has been rigorously tested and passed all checks, achieving CodeMark accreditation and Bushfire Attack Level 29 as well as Cyclonic C4 Rating.

CodeMark Certified Wall Systems - Melbourne

Our products have undergone stringent testing that demonstrates their suitability and compliances relative to the performance requirements on both volumes, one and two of the Australian National Construction Code. Making us the best codemark certified wall system around

Bushfire Attack Level

When tested to the rigorous AS1530.8.1-2007 testing methods of radiant bushfire stimulation test, including burning ember attack, the MasterWall system achieved the BAL29, and therefore achieving Bushfire compliance.

Cyclonic Rating - Brisbane

The rating C4 certification demonstrates MasterWall’s superiority under extreme weather conditions in Australia. For additional information on the wall insulation product performance and specifications, download our printable PDF brochure below.

The MasterWall Architectural Wall Panel Overview

Superior Stone Wall Cladding in Perth

Ready-to-render polystyrene panel is an external lightweight, architectural wall panel, mechanically fixed to the outer face of the building. The panels are completed by the application of an approved acrylic render, trims, sealants, opening flashings and decorative and waterproof coatings. The base material is (M) Grade expanded polystyrene (EPS) in sheet form with an applied facing of a cementitious- based material. This facing is reinforced with a fiberglass mesh. The facing is compatible with approved acrylic render and decorative finishes.

Facing

The facing of our MasterWall stone wall cladding system is made from a flexible cementitious-based material designed for both an excellent mechanical fix and natural bond to the polystyrene cladding. The finished surface of the facing has a light, trowel type texture with superior rigid insulation properties.

Reinforcing

The exterior facing is reinforced with alkaline-resistant, fibreglass mesh and compatible with approved acrylic render and decorative finishes.

Thermally Efficient Insulated Wall Cladding in Sydney

MasterWall’s lightweight rigid insulation panels contribute to the energy efficiency of Sydney homes. This thermally efficient, lightweight construction wall cladding system will help to decrease your cooling costs during Summer and heating costs during Winter.

About MasterWall Structural Insulated Roof Panels in Adelaide

MasterWall warehouses locally the insulated wall cladding panels and supplies the Sydney, Perth, Brisbane, Adelaide and Melbourne metro and regional areas. We also stock a large range of tools and accessories to assist with the installation of polystyrene panels and rendering products to create the perfect finish. Masterwall has developed a reputation for sheer excellence in the residential construction industry, working alongside many Australian Builders for home improvements, new homes and commercial projects throughout Sydney, Perth, Brisbane, Adelaide and Melbourne. For more information including a summary of performance and product details, refer to our MasterWall product brochure.

The MasterWall Warranty

We guarantee that our product is free from defects in materials and workmanship for a period of 7 years from the date of purchase. Our extensive laboratory testing ensures that our products have been engineered and tested to meet Australian Standards. So when you choose MasterWall for your next Sydney project you can rest assured you have made the right choice. For the best lightweight, rigid foam, construction wall and underfloor insulation in Sydney, Perth, Brisbane, Adelaide and Melbourne call MasterWall today on 02 9674 7402 or complete the contact us form on our website.

Underfloor Insulation In Melbourne, Brisbane, Sydney, Perth, Adelaide

MasterFloor Systems have been manufactured from a very dense and fire retardant polystyrene. Its very own unique, concertina design allows it to sit effortlessly under existing lightweight, raised flooring systems to improve a buildings thermal performance. The MasterFloor system is available in three thicknesses ranging from 50mm, 75mm and 90mm only.

MasterFloor is the Best Underfloor Insulation Product Available Rated up to 3.24

Your underfloor area measures the same as your building’s ceiling which makes it easy to understand why over 15% of energy losses within your dwelling are due to a less than ideal insulated floor. A sufficiently insulated raised floor system ensures that:

Your floor retains warmth and helps to stop you feeling the cold through your feet
Draughts entering your property from under your floor are eliminated
Sounds coming up from under the floor are minimised
The cost of heating and cooling your property is reduced with your home using less energy to attain desired room temperatures

Why You Need Quality Raised Flooring Systems in Adelaide

When you insulate your property's floor you are ultimately making it much more comfortable whilst reducing the cost associated with all heating and cooling during peak months.

How Does Under Floor Insulation Eliminate Cold Air From Your Melbourne Property

When your property lacks sufficient underfloor insulation, any of the cold air lying beneath seeps through the timber subfloor, making your property cold and uncomfortable. In terms of measuring the effectiveness of insulation it is measured in ‘R’ value, where ‘R’ represents ‘Resistance to Heat’. So, the greater the ‘R’ value - the higher the quality of insulation. Installing quality underfloor insulation in your Adelaide property will significantly increase your floor’s overall rating when compared to that of carpet and underlay alone. Underfloor insulation will make a noticeable improvement to the comfort of all that occupy the space.

Benefits Associated With The Best Underfloor Insulation in Brisbane:

Locally manufactured within Australia
Non-toxic, non-allergic and non-irritant
Eco friendly
Made using high quality materials
Deters rodents and pests

DIY Installation Process for Perth Homeowners

MasterFloor is easy to install to all existing flooring and makes a great weekend DIY project. For increased convenience, MasterFloor is available in 1150mm x 410mm panels, designed to fit most stud and floor joist scenarios

MasterFloor Underfloor Insulation from MasterWall in Sydney

MasterWall’s underfloor insulation is the ultimate choice when you are insulating your home to prevent heat from entering in summer and escaping during winter. You can enjoy warmer feet and save hundreds on your winter heating costs. MasterFloor is perfect for retrofitting in existing homes or for installing in your new home. Placed firmly between the floor joists it will ensure that your home is protected from extreme outdoor temperatures for life. This product can also be installed in pole houses and under exposed wooden floors.

About Us (Based in Perth)

MasterFloor has more than 60 years industry experience and has developed a strong reputation for excellence within the residential construction sector. We have been working in conjunction with many prominent Australian Builders for new home construction projects, home renovations as well as commercial projects throughout Sydney, Perth, Brisbane, Adelaide and Melbourne. For more detailed information or to obtain performance summary or specific product details, please refer to our MasterFloor product brochure available on our website. If you are looking for the highest quality underfloor insulation for your Sydney, Perth, Brisbane, Adelaide or Melbourne property, call MasterWall today on 02 9674 7402 or fill in the contact us form on the homepage of our website and one of our friendly staff members will be in touch with your shortly.